err:2c0d60

This error usually indicates that the iSCSI target IQN does not exist, or that the iSCSI initiator is not permitted to access the iSCSI target.

Check that the target IQN given in the iSCSI root path is correct.

Check that the iSCSI target is responding to the specified IQN.

Check the ACL for the iSCSI target. Note that some targets default to denying access; you may need to explicitly enable access for the initiator IQN used by iPXE.

Upgrading from gPXE

If you have upgraded from gPXE to iPXE, and if you are not setting an explicit iSCSI initiator IQN using DHCP option 203 (or an iPXE script), then you should be aware that the default iSCSI initiator IQN has changed to

iqn.2010-04.org.ipxe:<hostname> if you have a hostname assigned (e.g. via DHCP), or

iqn.2010-04.org.ipxe:<uuid> if you do not have a hostname assigned.

For example, if your DHCP server specifies a hostname of winxp-diskless.example.com, then iPXE will use the iSCSI initiator IQN iqn.2010-04.org.ipxe:winxp-diskless.example.com. If your DHCP server does not specify a hostname, then iPXE will use an initiator IQN based on your system UUID, such as iqn.2010-04.org.ipxe:d513a93e-a0a2-477e-9f46-b2d5c79bc2be.

You may need to update your ACL rules to use the correct iSCSI initiator IQN used by iPXE, rather than the old gPXE IQN iqn.2000-09.org.etherboot:UNKNOWN.